IHI Lubrication System

IHI Automated Lubrication Systems are manufacture by IHS -
Ishikawajima Hanyoki Services Co. Ltd, Japan to ISO 9001 standard

 

IHS has been developing, manufacturing and distributing various kinds of centralised lubricating systems since 1939. They have been widely used for steel industry, forging machines, paper making machines, cement plants, sewage disposal plants, garbage burning plants, chemical plants, ship loaders, mining equipment, water gates, etc. and have gained a reputation for excellent reliability.

Many of the IHI lubricating systems have mainly been employed by heavy industry but the IHI Auto Greastar range is a centralised lubricating system especially re-designed for general light machines & transport.

IHI equipment offers both single and dual line systems, chain conveyor and spraying systems for all types of equipment.

We can offer system design and arrange installation for any lubrication system whether it be a small manual system or complex fully automatic multi-point system with alarms.
 
   
 
 

 

 

Single Line Progressive System

Best suited to those systems having up to about 70 lubrication points spread over short distances. The systems use distributors where lubricant is progressively divided into piston displacement quantities of lubricant to each outlet in a fixed sequence as lubricant is pumped through the distributors.

· Pumps

  • Manual
  • Mechanical
  • Electric – 12V, 24V, 240V, 415V
  • Air
  • Hydraulic

A . Pump
B . MU- Type Distributor
C . M Type Distributor
D . UR Type Distributor
E . Pipelines

 

Manual

SK214
400cc, 1lt, 2lt reservoir
1cc / stroke
Grease - 2240 psi
Oil - 900 psi



Cryovac vacuumer – 24 points

Cold Rolling Press
– 12 points

Cinder Conveyor
– 8 points

 

SK505 12V / 24V
400cc, 1lt, 2lt reservoir
13cc/min minimum
Grease – 2240 psi
Oil - 900 psi
Low level kit available




CNCMachine – 12 points

 


Truck Chassis – 18 points

 
SK521 240V / 415V
2lt reservoir or custom made
25cc / min, or more, by 2 ports - Grease
0 - 25cc / min by 2 ports – Oil
Grease / Oil
Low level kit available
Grease – 2240 psi
Oil - 900 psi


Tile Press - 12 points

Pump in enclosure fitted to Schade coal stacker reclaimer 46 points

 
EP-11B 240V
6lt reservoir Grease
5lt reservoir Oil
40/48cc/min


EP-11B Pump - Coal Rotary Breaker – 30 points

 

Air

SKA-881 Reciprocating
Any reservoir size
Continuous 85cc / min adjustable
Grease / Oil
Low level kit available
Grease/ Oil
450-3000 psi

SKA-881-2


SKA881 oil pump is mounted so the contents of the reservoir are clearly visible. The reservoir low level switch is interconnected to the P.L.C. operating the vacuumizing machine

 
SKA-800 Single Stroke
Any reservoir size
0.2 – 4cc / stroke
Grease / Oil
450-2240 psi


Dough Cutter – 16 points

 
SKA-800A-2

Mechanical

SKA-722
2 litre reservoir
0 – 0.9cc / stroke x 1 port
0-1.8cc / stroke x 2 ports
Oil
900 psi

 


Metal Press – 15 points

Plyboard Saw – 2 points

Distributors

'U' Series
Compact, Single-end line type
Oil or Grease, Aluminium Die Cast with or without microswitch

Outlets - 4, 6, 8, 12
Combinations - Outlets can be cross ported, ie. 2 outlets combined into 1
Discharge
- 0.3 / stroke U-R Type, U-M Type
- 0.3-3cc / stroke MU Type
- 0.3-3cc / stroke M Type




U-R Type

 


Distributor on Right Hand Side of Chassis

 

U-M Type
(U-R Type fitted with Microswitch)

MU Type
(fits to M-Type to form a Master Distributor)

M-Type
(fits to MU-type to form Master Distributor)

 

B-Series

Heavy duty, high output, single end type.

Oil or Grease, Steel, with indicator pin, Microswitch option

Outlets - 2 to 16
Discharge - 0.1cc to 2.4cc / stroke
Combinations -Outlets can be cross ported

 
BJ-4M


Distributor with Standard built-in Cycle Switch

 


Distributor with Heavy Duty Cycle Switch

 
 Dual line systems are used to service lubrication points spread over long distances. Grease is pumped down line 1 which discharges grease to the point of application via a metering valve. Grease pressure builds up in line 1 till the changeover pressure is reached and at this point grease pressure changes to line 2, the pump stops and line 1 is released back to tank. At the next lubrication cycle, the sequence is repeated using line 2.

Many hundreds of points can be lubricated with a dual line system and different size bearings can be catered for with the adjustable volume facility available in the metering valve.


Motor-Driven Pump
Model EPA-4L

Manual Pump
Model MP-126