Single Line Progressive

1000 Series Divider Valve Manifold

The Series 1000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points.
3000 Series Divider Valve Manifold

The Series 3000 divider valve manifold distributes and proportions incoming oil or grease to bearing points.
Airmatic Lubricator

Adaptable air operated unit can be used with all centralized lubrication types. Ideal for all sizes of machinery.
CSK Lubricator

Designed for grease lubrication and driven by a DC motor, this lubricator is ideal for single line systems.
DS Series Lubricators

Motorized oil/grease pumps that are piston discharge pumps driven by DC or AC motor, controlled by a remote controller or PLC (not included). Ideal for series progressive and single line resistance lubricating systems.
Dynamis Lubricator

Electric lubricator with on-board controller and mountable series progressive divider valves.
Farval DA Lubricators

For bearings that require an application of lubricant infrequently, the manually-operated pumping unit is used, and may be located on the machine or at any convenient point nearby.
FD Series Divider Valve

Designed for use with progressive oil or grease systems, these valves are of steel construction with Viton O-rings standard.
Flexible Hose (High Pressure)

Used in high pressure PDI systems, these flexible hose assemblies are made of braided polyester hose with zinc plated tube ends.
FZ Series Lubricators

FZ-A and FZ-B are robust lubricators capable of delivering oil and grease in harsh and severe conditions. Adaptable to progressive systems and gear spray systems
Gear Pump

Gear pumps are driven from a rotating machine shaft either direct or by means of a gear or chain drive of suitable ratio. Direction of drive is established by looking at exposed end of pump drive shaft.
Junctions

Junctions, junction bars and junction headers are used in lubrication systems for easy branching of tubing lines from two to multiple outlets.
M2500 Series Divider Valve Manifold

The principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing.
MultiPort Lubricator

Self-contained electric motor driven pump. Up to 3 outlets, adapts to all types of centralized grease systems.
Pressure Gauges

Pressure gauges are used as a convenient means of indicating pressure developed in the distribution system.
PV-B/MV-B Divider Valve

The PV-B/MV-B divider manifold is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and grease.
SK-505 Lubricator

The SK-505 lubricator is a piston discharge pump activated by a small direct current (DC) electric motor.
SM-C Controller

Electric controller with various timer and count based models available. This controller has the ability to detect abnormal operating situations.
SM-DC Mobile Controller

A multi-purpose controller used in various lubricating system types, such as single line resistance, positive displacement injectors, progressive and pulse systems.
SS2200 Controller

Microprocessor-based programmable controller designed to operate single line and dual line central lubrication systems.
SS4500 Controller

Microprocessor-based programmable controller designed to operate single line and dual line central lubrication systems.
SureMatic Lubricator

Adjustable output, pneumatic operated pump handles semi-fluid, soft & firm greases up to NLGI No. 2.
TTN Lubricator

The TTN lubricator is a rugged, compact, electric, motor-driven lubricator. It has a large reservoir, on-board controller/monitor and a small footprint.
U-Block Divider Valve

U-Block divider valves are specially designed for use in progressive lubrication systems. Several outlet configurations are available that allow you to tailor the divider valve to your lubrication specifications.